Technical information
Please check the connector between receiver and esc, and see if motor connector is properly attached. Please do a visual inspection if theres a bend pins...
Mon, 22 Nov, 2021 at 3:39 AM
Make sure you are connected to wifi or any internet network Steps and procedure 1. Close the app 2. Factory reset your esc (unplug and plug again your...
Mon, 22 Nov, 2021 at 3:40 AM
Yes you can go to FURICAR APP, find user button settings and change to NONE
Mon, 22 Nov, 2021 at 3:40 AM
Make sure your servo wires is properly connected to your receiver, and plug to channel 1 in your RX
Mon, 22 Nov, 2021 at 3:41 AM
Esc is now in Bootloader Steps and troubleshooting procedure 1. plug your lipo to esc 2. make sure your BT module is attached properly to esc 3. conn...
Mon, 22 Nov, 2021 at 3:42 AM
Please check the voltage of your lipo battery
Mon, 22 Nov, 2021 at 3:43 AM