Technical Information : Furitek

Technical Information

Can I use stock scx24 RX to run Furitek esc

Yes, can use stock scx24 esc/rx

Mon, 22 Nov, 2021 at 3:35 AM

Can I run 3s lipo for Lizard?

Mon, 22 Nov, 2021 at 3:37 AM

If I did not buy a BT, is there any other way I can run and calibrate Furitek esc?

Yes, (Please refer to the user manual for manual calibration)

Mon, 22 Nov, 2021 at 3:38 AM

My motor is not responding and there's no throttle response, what should I do?

Please check the connector between receiver and esc, and see if motor connector is properly attached. Please do a visual inspection if theres a bend pins...

Mon, 22 Nov, 2021 at 3:38 AM

Furitek esc are waterproofed?

Only tegu (Fuk-2033 and Fuk-2029)

Mon, 22 Nov, 2021 at 3:41 AM

My esc don’t have steering, what should I do?

Make sure your servo wires is properly connected to your receiver, and plug to channel 1 in your RX

Mon, 22 Nov, 2021 at 3:41 AM

My device can find the BT but it wont connect me to main menu, I can only see "PLEASE WAIT RECONNECT TO DEVICE: RCAR"

Steps and procedure 1. Close the app 2. Factory reset your esc (unplug and plug again your battery to esc 3. open FURICAR app and try again

Mon, 22 Nov, 2021 at 3:42 AM

Running a lizard esc with stock scx24 rx, rx leds keep flashing, whats the problem?

Flashing blue led light means theres no connection between RX and ESC, make sure to check the connection. If all connection is securely attached and ther...

Mon, 22 Nov, 2021 at 3:43 AM

No Throttle response but with steering

Please check the voltage of your lipo battery

Mon, 22 Nov, 2021 at 3:43 AM